-
LOCATION:HOME >> PRODUCT >> 55% galvalume steel
-
55% galvalume steel
Galvalume Corrugated Metal Roof Panels
Galvanized steel is steel that has gone through a chemical process to keep it from corroding.The steel gets coated in layers of zinc oxide because this protective metal does not get rusty as easily.
product introduction
Galvanized steel is steel that has gone through a chemical process to keep it from corroding.The steel gets coated in layers of zinc oxide because this protective metal does not get rusty as easily.The coating also gives the steel a more durable ,hard to scratch finish that many people find attractive.For countless outdoor,marine,or industrial applications, galvanized steel is an essential fabrication component.
1. Super corrosion resistance:
under various environmental conditions, aluminum zinc coated steel coil has excellent corrosion resistance than hot-dip galvanized steel coil with the same thickness, and its service life is 2-6 times that of ordinary galvanized steel plate. Because the microcrack of aluminum zinc plating on the deformed part is smaller than that of hot-dip galvanizing, its corrosion resistance is much higher than that of hot-dip galvanizing.
Its service life order: Rural – industrial atmosphere – General marine atmosphere – serious marine atmosphere
2. High temperature oxidation resistance:
ordinary hot-dip galvanized products usually have a service temperature of no more than 230 ℃, and will change color when reaching 250 ℃, but aluminized zinc products can be used for a long time at 315 ℃. And there will be no discoloration or deformation;
3. High refectivity:
the reflection coefficient of aluminized and zinc products is twice that of hot-dip galvanized plates. Acting as roof and panel without painting can achieve energy-saving effect;
4. More usable area:
the density (3.75g/m3) of the coating of aluminized zinc steel coil is much smaller than that of the coating of galvanized steel coil (7.15 g / m3). Therefore, when the steel substrate and coating thickness are the same, the usable area per ton of aluminized zinc steel coil is much more than that of galvanized steel coil
Product parameters
Aluzinc steel roofing sheets | |
Material | Steel, Corrugated Zinc Sheet Plate |
Color | zinc coated |
Surface Treatment | Normal chromated etc |
Standard | JIS G3302, SGCC, DX51D |
Thickness | 0.151-1.2mm |
Width | 914mm, 1000mm, 1200mm, 1220mm, 1250mm or as requirement |
Length | according to the steel coil |
Zinc Coating | 60g/m2 - 275g/m2 |
Spangle | min/regular/big/zero |
Factory warehouse storage
PACKING : Wrapped with water proof paper + metal plate , metal envelop and metal edge protector , strapped with steel strips , then on steel square pipes pallet .
SHIPPING :
By 20ft container , max loading 28 tons in one 20ft container .
By bulk vessel , for quantity more than 100 tons .