-
LOCATION:HOME >> NEWS >> Industry news
-
Industry news
A Lift Hangs on Rope, an Escalator Rides a Truss
The machine nobody watches
Vertical transport is the least visible steel order in a building. The stainless steel 201 page makes the point in one line of its application list: escalator, elevator, doors. Between the three words sits almost the whole steel content of a lift shaft and an escalator well, and the material list does not stop at sheet. The stainless steel wire rope page lists elevator among its rope materials in its own parameter table. A lift hangs and an escalator spans, and the two steel problems could not be more different.
The car hangs from six ropes
Take a 13-passenger car with a rated load of 1,000 kilograms and a car weight of 1,300 kilograms. The counterweight is set at the car plus half the payload, so 1,800 kilograms, which is why the empty car climbs and the full one descends with almost equal ease. On the car side, rope tension is the car weight plus payload, 2,300 kilograms, or 22.6 kilonewtons. Six suspension ropes share that equally in a 1:1 roping, so each rope carries 3.76 kilonewtons standing still. The lift code sets the required factor of safety for suspension ropes at twelve, so each rope must post a minimum breaking force of 12 times 3.76, which is 45 kilonewtons.
That single number picks the rope. The wire rope page lists its grade options as 1770, 1870, 1960 and 2160, with diameters from 0.8 to 21.4 mm. An 8 mm rope from the top of that list, the 2160 class, posts a breaking force of roughly 47 kilonewtons, which clears the requirement with a factor near twelve and a half and no margin to spare. A 10 mm rope in the ordinary 1770 class breaks nearer 60 kilonewtons and lands the factor around sixteen. Most ropemakers take the second option: rope is bought per metre, but re-roping a shaft is bought per week of downtime.
Bending is what actually kills the rope
A suspension rope does not fail on the drum; it fails where it wraps. The traction sheave must stay at forty rope diameters or more, so an 8 mm rope runs on a sheave of at least 320 mm. Each pass over the sheave is one fatigue cycle on every wire, which is why the page's constructions matter: 6x19 is the classic traction compromise between bend life and wear, while the finer 6x37 bends better and abrades faster. The page offers steel or fibre cores, and the grease the description mentions is not optional packaging: it is worked into the rope to cut internal wear and hold rust out of the strands. The AISI 304 316 stainless steel wire rope page adds the buyer's clause, samples available and a one-tonne minimum, which matters because a shaft re-rope is still measured in hundreds of kilograms, not tonnes.
An escalator is a bridge that happens to move
The escalator truss carries nothing but itself and its passengers, but it does it across a clear span between two floor slabs. Rise 4.5 metres at the standard 30 degrees and the inclined length is 9.0 metres over a horizontal span of 7.8 metres. The escalator standard holds truss sag to about one seven-hundred-and-fiftieth of the span, which is a deflection budget of barely 10 millimetres. The live load alone is 5 kilonewtons per square metre over a one-metre step band, 45 kilonewtons of people spread along the incline. A welded truss in ordinary structural plate, the Q235 hot rolled steel plate being the everyday grade for exactly this fabricated-work class, carries that as a simply supported beam with almost no margin for sloppy welding, which is why escalator trusses are shop-built and never site-modified.
What you see is 201 and a finish
The cladding that passengers actually touch is where grade 201 earns its place. It was developed to conserve nickel, with manganese and nitrogen standing in for part of it, and an escalator interior is the friendly environment for that economy: dry, chloride-free, cleaned nightly. Cold rolled 201 sheet runs from 0.15 to 10 mm on the grade page, and the door skins and balustrade panels sit near the thin end, typically a hair over a millimetre, formed and brushed in place. One property surprises buyers every year: the grade is essentially nonmagnetic as annealed but turns magnetic where it has been cold worked, so a magnet sticking to a folded balustrade edge is a sign of forming, not of fake steel.
The finish is specified as much as the grade. The 201 stainless steel coil page defines HL as continuous polishing streaks and No.4 as polished with 150 to 180 grit abrasives, and the hairline direction is set by the escalator manufacturer so the streaks run along the travel, where they hide fingerprints rather than display them. Where an entrance faces sea air or a washdown lobby, the upgrade path is on the Type 304 stainless steel page, with 8 to 10.5 per cent nickel and 18 to 20 per cent chromium, and the panelling line on the AISI 304 stainless steel page covers the splash-backs and architectural trims around the doors.
The steel around the machine
Two catalogue items finish the shaft. Landing railings and the queues beside them are pipe work, and the stainless steel pipe page lists handrail, railing and staircase in the same application line, in round tube from 8 mm to 680 mm; a seafront lobby takes the same railing schedule a grade up, in the 304 and 304L pipe that suits washed and salted surroundings. And where a lift shaft or an escalator well opens into an atrium, the edge needs a barrier that stops a dropped phone or a slipped toolbox without blocking light. The flexible stainless steel wire rope net page supplies exactly that as balustrade fence nets and complete anti-fall nets, in 7x7 and 7x19 rope meshes from 70 x 102 up to 120 x 208 millimetre apertures, with breaking forces tabulated per mesh model so the specifier can match the net to the fall height.
Five lines for the enquiry
Written as an enquiry, the shaft steel is short. Six suspension ropes in a stated grade and diameter against a safety factor of twelve; a shop-welded truss in structural plate with a deflection record; 201 cladding at a stated gauge and HL finish; 304 at the wet entrance; pipe for the landings and a tested net for the open edges. The pages that supply it list elevators, doors and anti-fall nets without ceremony, because to the steel trade this is routine material. Only the passengers think it is magic.